CPV
HomeAbout UsProductsApplicationsTechnical DataTechnical DataSite IndexSite Map


News


Click to learn more...

CPV brings new design to the Internet.

The all new website is redesigned for faster navigation, easier access to product information and has valuable new Technical Data

Click to learn more...

Bonadio named new President of CPV

President, Bob Engle steps down and George Bonadio assumes command.

Click to learn more...

CPV O-Seal Valves Engineered for Reliability

Shut off, Needle and Check valves rated for 6000 psi from -20°F to 225°F for gas or liquid service.

Click to learn more...

CPV Flush Plugs Speed Cleaning Operations

Flush Plugs facilitate cleaning piping systems to flush out contaminants while protecting valve cartridge assemblies.

 

Click to learn more...

CPV QC & Quality Assurance

All CPV valves are thoroughly inspected and bench tested before shipment to assure valve-to-valve consistency and long-term reliable service

Click to learn more...

Soft Goods Installation Tool protects stem seal during replacement

"U" cup installation tool developed by CPV enables users to replace an O-Seal valve stem seal in less than a minute.

Click to learn more...

Hollow core spacer protects valves during welding/brazing

Reusable valve spacer is the exact face-to-face dimension of an O-Seal valve so it can be substituted during valve maintenance or brazing operations to protect valve from heat damage.

Click to learn more...

Burst Test data demonstrates reliability of CPV brazed fittings

Burst pressures of Mark VIII O-Seal brazed fittings, in all test results, substantially exceed their 6000 psi rating.

Click to learn more...

Valve lubrication and maintenance

Regular lubrication is a must in high pressure gas piping systems to maintain valve efficiency.

Click to learn more...

Stainless Steel Tube Fittings Never Shake Loose

CPV Mark VIII O-Seal stainless steel tube fittings in O.D. tube sizes from 1/4" to 2.  For leakproof reliability to 6000 psi.  Liquid or gas service.

Click to learn more...

Catalog details G-Series Stainless Steel Valves

12 Page catalog details all available stainless steel valves:  6 orifice sizes (from .218 to .813 inches); 3 valve types (shut off, needle & check); 2 body types (inline or angle); 12 different end connections and 8 different seal materials.

 

Home | About Us | Products | Applications | News | Technical Data | Contact Us | Site Map

Copyright by CPV Manufacturing, Inc. - All rights reserved.

CPV products are available worldwide. Contact us to get in touch with your local CPV factory representative.

CPV Manufacturing, Inc. • 851 Preston Street, Philadelphia, PA 19104-1598
Phone 1-(888) 386-8830 or 1-(215) 386-6508 • Fax (888) 387-9043 or 1-(215) 387-9043