Javelin Design: CPV
HomeAbout UsProductsApplicationsTechnical DataTechnical DataSite IndexSite Map


Technical Data

TORQUE VALUES FOR BONNETS & GLAND NUTS OF G-SERIES VALVES

1. The following Torque Values are to be used for assembling the valves given.

2. The values shown are for dry assembly. If lubrication is used on the threads, it is recommended that torques close to the minimum be used.

3. The minimum values establish the lower limit for permanent assembly. Lower values should not be used. Torque Values larger than the maximum are not recommended without prior approval.

Torque Values in Foot Pounds

VALVE SIZE BONNET GLAND NUT
MIN. MAX. MIN. MAX.
G0 30 38 25 32
G1 50 60 25 32
G2 70 90 30 38
G3 90 115 40 50
G4 110 140 40 50
G5 130 170 55 70

 

Home | About Us | Products | Applications | News | Technical Data | Contact Us | Site Map

Copyright by CPV Manufacturing, Inc. - All rights reserved.

CPV products are available worldwide. Contact us to get in touch with your local CPV factory representative.

CPV Manufacturing, Inc. • 851 Preston Street, Philadelphia, PA 19104-1598
Phone 1-(888) 386-8830 or 1-(215) 386-6508 • Fax (888) 387-9043 or 1-(215) 387-9043