Soft Goods Kit
Replacement Soft Goods for O-Seal System Valves

In the event that the sealing elements used in an 0-SEAL SYSTEM Valve ever need replacement, a soft goods kit can be obtained containing all four of the items required.

To order a soft goods kit, determine the proper material grouping shown across the top of the chart below. Read down the column and select the Kit Number on the horizontal line matching the valve size or Dash Number. For example:

A ½ in. 380-3 Globe valve requires a soft goods kit. The valve is used in compressor air service, and the compressor is lubricated with a petroleum-based oil. The materials listed in the first column under Material Grouping are satisfactory for this service. Continue down this column to the line for Dash No. —3 (½ in. pipe size) to determine that the Kit Number is 003803.

STEM SEAL INSTALLATION TOOL. To prevent possible damage to the sealing edges when replacing the stem seal (item 1) on 0-SEAL SYSTEM Valves, CPV offers a unique "U" cup installation tool. This easy-to-use device simultaneously compresses the outer sealing lip and expands the inner lip during installation. For details, request ID Bulletin 841, or order the tool for the appropriate valve size(s) by using the part number(s) in the right hand column.